Edit - Track Copy/Mix - Yamaha PortaTone PSR-6000 Owner's Manual

The Sequencer
EDIT — TRACK COPY/MIX
Copies the data from one recorded track to another, or mixes the data from two recorded tracks (except the
ACCOMP. track).
Use the SOURCE1 LCD dial to set the first
source track, the SOURCE2 LCD dial to set the
second source track, and the DESTINATION LCD
dial to set the destination track. If "CPY" is selected
for the SOURCE2 parameter, only the SOURCE1
track is copied to the destination track.
Once the source and destination tracks have been
selected, press the EXECUTE LCD button to actu-
ally execute the copy or mixdown operation. "Ex-
ecuting." will appear on the display while the
operation is in progress, and "Completed." will
appear briefly when the operation has finished.
Immediately after execution an "UNDO" LCD
button will appear on the left side of the display, and
that button can be used to undo the copy or mixdown
if it was executed by mistake. The undo function is
only available until the next operation is performed.
NOTES
• The mix function is most useful when you want to
record more than 7 individual parts on the seven
orchestra-part tracks. Successfully recorded parts can
be combined using this function, thus opening up more
tracks for further recording. The data in the source
tracks is not erased during a mix operation.
• If the tracks that are mixed use different voices, the
voice of the lower-numbered track will be used. Subse-
quent recorded voice changes will operate normally.
• Please note that only tracks containing data can be
specified as the source tracks — tracks containing no
data are indicated by an asterisk (*).
• Any data in the destination track will be overwritten by
data copied from the source 1 and 2 tracks.
56
.................................................................................................................................................
Copy
Source track 1
Copy to Destination track
Mix
Source track 1
Source track 2
Destination track
Data
Data
Data
Data