One Touch Setting Synchro Change; Interactive Accompaniment; F4: One Touch Setting/Ia - Yamaha PortaTone PSR-6000 Owner's Manual

F4: One Touch Setting/IA

ONE TOUCH SETTING SYNCHRO CHANGE

Determines whether One Touch Setting varia-
tion switching will occur at the same time as accom-
paniment style and verse-to-chorus switching.
When ON, selecting a different accompaniment
style or switching between the VERSE and CHO-
RUS variations while ONE TOUCH SETTING is
engaged will cause the ONE TOUCH SETTING
settings for that style or variation to be selected
automatically.
Also, if you change a ONE TOUCH SETTING
setting the corresponding ONE TOUCH SETTING
indicator will flash to indicate that a change has
been made. When OFF no change occurs in the ONE
TOUCH SETTING settings when a different style
or VERSE/CHORUS variation is selected.
Use the 1 LCD dials to turn the SYNCHRO
CHANGE parameter ON or OFF.

INTERACTIVE ACCOMPANIMENT.

The parameters in this section of the display
select one of two available Interactive Accompani-
ment modes, turn the AUTO SOLO function on or
off, determine the keyboard part on which Interac-
tive Accompaniment will be based, and set the
sensitivity of the Interactive Accompaniment func-
tion.
MODE Use the 2 LCD dial to select the MUTE or ADVANCED MODE.
• When the MUTE Interactive Accompaniment mode is selected, accompaniment parts that may inter-
fere with what is played on the keyboard are automatically lowered in volume when the keyboard is
being played. When the ADVANCED mode is selected, the above function is combined with auto-
matic muting of interfering parts and automatic switching between VERSE 1 and VERSE 2 or be-
tween CHORUS 1 and CHORUS 2 in response to keyboard activity. The default Mode setting is AD-
VANCED.
AUTO SOLO Use the 3 LCD dial to turn AUTO SOLO ON or OFF.
• When the AUTO SOLO function is turned ON, the solo accompaniment variations will automatically
be activated if nothing is played on the keyboard for a few measures (the actual number of measures
depends on the selected style). Further, the solo variations will automatically be de-activated at the
end of the current phrase after keyboard performance is resumed. No automatic solo switching oc-
curs when the AUTO SOLO function is turned OFF. The default AutoSolo setting is ON.
PART Use the 4 LCD dial to select the keyboard part(s) on which Interactive Accompaniment is to be based.
• When the PART parameter is set to R+L, the Interactive Accompaniment system responds to activity
(i.e. anything you play) on the entire keyboard. When set to RIGHT only activity on the right-hand
section of the keyboard is detected, and when set to LEFT only activity on the left-hand section of the
keyboard is detected. The default PART setting is RIGHT.
SENSITIVITY Use the 5 LCD dial to set the desired Interactive Accompaniment sensitivity.
• The sensitivity range is from 1 to 8. 8 is the highest sensitivity. In this case "sensitivity" refers to how
much activity the Interactive Accompaniment system must detect in the specified section(s) of the
keyboard before a change in the accompaniment occurs. The default Sensitivity setting is 4.
..................................................................................................
NOTES
• Turning this function on can provide greater contrast be-
tween the chorus and verse variations when using the
Accompaniment feature.
• When the SYNCHRO CHANGE parameter is OFF, the
current ONE TOUCH SETTING indicator will go out if any of
the settings it includes is changed.
• The default setting is "OFF".
..
89