Procedure When Installing The Motor - Siemens SIMOTICS T-1FW6 Configuration Manual

Configuration
5.4 Installation
Table 5- 7
1FW605, 1FW606 / stator
1FW605, 1FW606 / rotor
1FW609, 1FW613 / stator and rotor
1FW615 / stator and rotor
1FW616, 1FW619, 1FW623 / stator
1FW616, 1FW619, 1FW623 / rotor
1FW629 / stator
1FW629 / rotor
*) See the installation drawing "detail Z"
5.4.6

Procedure when installing the motor

Sequence for installing the motor
Risk of injury and material damage
Injury and/or destruction of motor components can occur if you do not observe the specified
sequence when installing the motor.
• Perform work steps in the specified sequence during installation.
128
Maximum permissible screw insertion depths for the stator and rotor
Component
WARNING
Max. permissible screw-in depth
in mm
8.5 + section without thread *)
11
10
12
13
12
15
15
Configuration Manual, 07/2017, 6SN1197-0AE00-0BP9
Thread
M6
M6
M5
M6
M8
M8
M10
M10
1FW6 Built-in torque motors