Remote Control To Computer Sequence Software; Mute] Button; Track Select] Button - Yamaha MOTIF6 Owner's Manual

Remote Control to Computer Sequence Software

When the [REMOTE CONTROL ON/OFF] button is turned on, the following buttons/controllers can control
the Audio track mixer and sequencer transport of the computer sequence software connected to the MOTIF.
J∆
NUMBER button[1]~[16]
These buttons are used to select the corresponding
tracks of the computer sequencer software, or to
turn those tracks on/off, depending on the on/off
status of the [TRACK SELECT] button and [MUTE]
button.
1 2
ELEMENT/ PERF.PART / ZONE
9 10

[MUTE] button

When this is turned on, the NUMBER [1] - [16]
buttons are used to turn the corresponding tracks of
the computer sequence software on or off.
1 2
ELEMENT/ PERF.PART / ZONE
9 10
Control Sliders
Adjusts the Volume for each track of the computer
sequence software.
[SEQ TRANSPORT] buttons
Controls the transport functions on the computer sequence
software.
TRACK
3 4 5 6 7 8
SELECT
NUMBER
11 12 13 14 15 16 MUTE
SOLO
TRACK
3 4 5 6 7 8
SELECT
NUMBER
11 12 13 14 15 16 MUTE
SOLO
MASTER
VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4
VOLUME
CS 1 CS 2 CS 3 CS 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
SEQ TRANSPORT
2
LOCATE 1
REC
Quick Start Guide (page 119) · Reference (page 256)
Knob
Adjusts the Pan, Effect send level, and Equalizer
for each track of the computer sequencer.
PAN CHORUS
REVERB TEMPO
CUTOFF RESONANCE ATTACK RELEASE
KNOB
ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2
CONTROL
FUNCTION
KN 1 KN 2 KN 3 KN 4
MEQ LOW
MEQLOWMID MEQ HI M ID MEQ HIGH
[TRACK SELECT]
button
When this is turned on, the NUMBER
[1] - [16] buttons are used to select the
corresponding tracks of the computer
sequence software.
1 2 3 4 5 6 7 8
ELEMENT/ PERF.PART / ZONE
9 10 11 12 13 14 15 16
Main functions
TRACK
SELECT
NUMBER
MUTE
SOLO
65
MOTIF Basic Structure