Optional Plug-In Board Installation - Yamaha MOTIF6 Owner's Manual

Installing Optional Hardware
Optional Plug-in Board
Installation
A variety of optional Plug-in boards sold separately let
you expand the voice library of your instrument.
The following types of Plug-in boards can be used with
your instrument.
• PLG150-AN • PLG150-PF
• PLG150-DX • PLG100-XG
The MOTIF provides three slots for the Plug-in board.
Therefore, up to three boards can be installed to
the rear panel.
n The Vocal Harmony Plug-in board (PLG100-VH) can
installed only to slot 1.
n The Multi part Plug-in board (PLG-100XG) can installed
only to slot 3.
n The Single part Plug-in board can installed to any of
three slots.
1
Turn the MOTIF power off, and disconnect the
AC power cord. Also, make sure to disconnect the
MOTIF from any connected external devices.
2
Remove the large screw from the expansion bay
cover on the rear panel using a Phillips
screwdriver.
Keep the removed screw in a safe place. It will be used
when attaching the cover to the MOTIF again.
MOTIF6 / MOTIF7
Plug-in SLOT
ASSIGNABLE OUTPUT OUTPUT
R L R L MONO PHONES
Plug-in SLOT
ASSIGNABLE OUTPUT OUTPUT
R L R L MONO PHONES
282
MOTIF Appendix
• PLG150-VL
• PLG100-VH
3
GREEN
2
YELLOW
1 ORANGE
A D INPUT
GAIN
R L
3
GREEN
2
YELLOW
1 ORANGE
A D INPUT
GAIN
R L
MOTIF8
3
GREEN
2
YELLOW
Plug-in SLOT
1 ORANGE
3 GREEN
2 YELLOW
Plug-in SLOT 1 ORANGE
3
Remove the ribbon cables that are to be connected
to the Plug-in board from the inside of the MOTIF.
The slots are assigned to the color-coded cables as
follows:
Slot 1 — Orange
Slot 2 — Yellow
Slot 3 — Green
Cable for Slot 3
(Green)
Cable for Slot 2
(Yellow)
Cable for Slot 1
(Orange)
ASSIGNABLE OUTPUT
R L
3
GREEN
2 YELLOW
Plug- in SLOT
1 ORANGE
Slot 3
Slot 2
Slot 1
OUTPUT A D INPUT
GAIN
R L MONO PHONES R L