In The Voice Mode; Effect Connection - Yamaha MOTIF6 Owner's Manual

System Overview

Effect connection

● In the Voice mode:
You can select the Insertion connection among three types.
Tone Generator
block
Element 1
Element 2
Element 3
Element 4
This determines which Insertion
system, 1 or 2, is applied to each
Element (or to each key when the
Drum voice is selected). The
Insertion effect can also be
bypassed.
n The parallel connection is not available for Plug-in voices.
● In the Performance mode:
The diagram below indicates the connection when the Vocal Harmony Plug-in Board (PLG100-VH) is installed to slot 1.
Select the part to which the
Insertion effect is applied from
parts 1-4 and Plug-in parts 2-3.
The connection type depends
on the setting of the Voice
assigned to the selected part.
Tone Generator
block
Part 1-4,
Plug-in part 2-3
Select the part to which
the Plug-in Insertion
effect is applied from
parts 1-4, Plug-in parts
2-3 and A/D Input part.
nThe Vocal Harmony Plug-in Board (PLG100-VH) can be installed only to slot 1. It cannot be installed to slot 2 or 3.
40
MOTIF Basic Structure
System Effect
Reverb
Chorus
Insertion Effect
Send Level
1
2
You can select the Insertion connection
from the three types shown below.
1 to 2
1
2
System Effect
Variation
Insertion Effect
Send Level
1
2
Insertion Effect
(Plug-in)
A/D Input
• External audio source
• Microphone sound
Return Level
Master Equalizer
parallel
2 to 1
1
2
Reverb
Chorus
Return Level
Master Equalizer
Reference (page 137)
Output
1
2
Reference (page 169)
Output