Appendix; Information Displays - Yamaha MOTIF6 Owner's Manual

Information Displays

The convenient Information displays let you see at-a-
glance some of the more important settings relevant to
each mode. Select the desired mode, then press the
[INFORMATION] button to call up the Information
display for that mode. To exit from the display, press
the button again (or any other panel button).
■ Voice mode
• Bank
Indicates the Bank/Number (page 124) of the currently
selected Voice.
• EL 1234
Indicates the currently selected voice, on/off status of four
elements and mono/poly (page 128) status.
• Porta (Portamento)
Indicates the Portamento switch on/off status of the
currently selected voice.
• PB (Pitch Bend)
Indicates the Upper/Lower setting of the Pitch Bend range.
• Ins1 (Insertion 1), Ins2 (Insertion 2), Rev
(Reverb), Cho (Chorus)
Indicates the currently selected effect type for each effect
block (page 137).
■ Performance mode
• Bank
Indicates the Bank/Number (page 162) of the currently
selected Performance.
• 1 (Plug-in board 1), 2 (Plug-in board 2), 3
(Plug-in board 3)
Indicates the installation status of the respective Plug-in
board. The Plug-in board name is displayed at the right of
the corresponding slot number. When PolyExpand
page 259
( ) is set to on in the Utility mode, "P" is
indicated at the left of the slot number.

Appendix

• InsPart (Insertion part), PLG (Plug-in Insertion
part)
Indicates the part number to which the Insertion effect is
applied and the part number to which the Plug-in Insertion
effect is applied (when the PLG100-VH is installed).
• Rev (Reverb), Cho (Chorus), Var (Variation)
Indicates the currently selected effect type for each effect
block (page 169).
■ Song mode
● Song Play mode
Indicates the amount of currently unused (available)
memory (DRAM) for song recording.
● Song Mixing mode
• PlugInfo/Port (Plug-in board installation
status)
Indicates the Plug-in board name and its MIDI port
number (
PolyExpand (
"P" is indicated at the left of the slot number.
• InsPart (Insertion part), PLG (Plug-in
Insertion part)
Indicates the part number to which the Insertion effect is
applied and the part number to which the Plug-in
Insertion effect is applied (when the PLG100-VH is
installed).
• Rev (Reverb), Cho (Chorus), Var
(+Variation)
Indicates the currently selected effect type for each effect
block (page 210).
page 260
) at the right of the slot number. When
page 259
) is set to on in the Utility mode,
MOTIF Appendix
Information Displays
275