Yamaha MOTIF6 Owner's Manual page 245

● [F1]-08 Fade In/Out
This Job lets you create fade-ins and fade-outs for
the sample.
Set the Waveform and Key Bank containing the
esired sample.
Press the [F5] (CANCEL) button
to cancel the operation.
Press the [F6] (OK) button to assign the
edited sample to the specified Key Bank.
Press the [ENTER] button to execute the
operation. If you re not satisfied with the
results, change the Type and Length values
and press the [ENTER] button again. This
automatically reverts back to the original
settings and executes the operation again
with the new settings.
• Type
Determines the type of level fade: fade-in or fade-out.
❏ Settings
in (fade-in), out (fade-out)
• Length
Determines the length of the fade-in or fade-out.
When a fade-in is selected, this parameter specifies the
length of the fade starting at the specified Start point.
When a fade-out is selected, this parameter specifies the
length of the fade starting at the beginning of the fade and
ending at the specified End point.
❏ Settings
0000000~End point
Fade In
Length
Start point
Fade Out
Length
End point
Press the [ENTER]
button to
execute the Job.
● [F1]-09 Convert Freq
This Job lets you halve the sampling frequency of
the specified sample. This can be used to convert hi-
fi samples to a lo-fi sound, and reduce the sample
size by half to conserve memory.
Set the Waveform and Key Bank containing
the sample to be converted.
Press the [F5] (CANCEL) button
to cancel the operation.
Press the [F6] (OK) button to assign the
converted sample to the specified Key Bank.
Press the [ENTER] button to execute the operation.
If you re not satisfied with the results, change the Type
and Length values and press the [ENTER] button again.
This automatically reverts back to the original settings
and executes the operation again with the new settings.
● [F1]-10 Stereo to Mono
This Job lets you convert a stereo sample to a mono
sample.
Set the Waveform and Key Bank containing the
sample to be converted.
Press the [F5] (CANCEL) button
to cancel the operation.
Press the [F6] (OK) button to assign the
converted sample to the specified Key Bank.
Press the [ENTER] button to execute the operation.
If you're not satisfied with the results, change the Type
value and press the [ENTER] button again. This
automatically reverts back to the original settings and
executes the operation again with the new settings.
Sampling Job mode
Press the [ENTER]
button to
execute the Job.
Press the [ENTER]
button to
execute the Job.
245
MOTIF Reference