Plug-In Voice Edit - Yamaha MOTIF6 Owner's Manual

● [F6] Drum Key EQ (Equalizer)
Same as in Normal Voice Element Edit. See
page 148.
n This parameter is effective for Drum keys whose
Type parameter (in the Oscillator Wave display,
page 150) has been set to "Preset wave" or "User
wave."

Plug-in Voice Edit

◆ Common edit and Element edit
Same as Normal Voice Edit. See page 129.
Unlike with Normal voices, the Plug-in voices only
have one element for editing.
◆
About Plug-in voices and Board voices
The voices of a Plug-in Board installed to the MOTIF
can be divided into two types: Board voices and Plug-in
voices. Board voices are unprocessed, unaltered voices
of the Plug-in board — the "raw material" used for the
Plug-in voices. Plug-in voices, on the other hand, are
edited Board voices — voices that have been specially
programmed and processed for optimum use with the
MOTIF.
Included among the Board voices is a special set of
voices — called Board Custom voices — which can be
edited by a computer connected to the MOTIF, using
special editing software included with the Plug-in
board. (See page 87.)
Plug-in voice
Plug-in preset voice
Plug-in user voice
MOTIF voice parameter
Board voice
Board preset voice
Board custom voice
Basic Structure (page 43)
Copy
Plug-in
Voice Edit
Store
Cannot be eited
Save
Bulk send/
edit
Computer
(Voice Editor in CD-ROM
supplied with the Plug-in board)
n Depending on the particular Plug-in board you are using,
some of the parameters described here may not be
available. For details, refer to the relevant owner's
manual of the Plug-in board.
n For details on the current lineup of available Plug-in
boards, see page 35.
◆ Basic Procedure
1
Press the [VOICE] button to enter the Voice Play
mode. (The indicator lights.)
2
Select a Plug-in voice to be edited.
3
Press the [EDIT] button to enter the Voice Edit
mode. (The indicator lights.)
4
Select an element to be edited.
• To edit the Common parameters, press the
[DRUM KITS] button (which serves as a
"COMMON" button here).
DRUM KITS
FAVORITES
COMMON
• To edit the Element parameters, press any one of
the NUMBER buttons ([1] - [4]). (Editing is the
same, no matter which NUMBER button you
press.)
1
2
ELEMENT/ PERF.PART / ZONE
5
Select the menu you wish to edit by pressing the
[F1] - [F6] and [SF1] -[SF5] buttons.
6
Edit the parameters for the selected voice.
7
Store the settings edited in step #6 to the User
Memory as required.
8
Press the [EXIT] button to exit from the Voice Edit
mode.
• For detailed instructions on steps #5 - #6, see the
explanations below.
• For details on step #7, refer to "Voice Store
mode" on page 159.
Voice Edit mode
Basic Structure (page 70)
4
3
153
MOTIF Reference