Yamaha MOTIF6 Owner's Manual page 169

• OutputSwitch
When this is set to on, Arpeggio playback data is output
from the MIDI terminal.
❏ Settings
on, off
• TransmitCh
Determines the MIDI transmit channel for Arpeggio
playback data.
❏ Settings
1 ~ 16
● [F4] Common Controller Assign
The controllers and knobs on the front panel can be
used to change and adjust a variety of parameters —
in real time, and simultaneously.
For example, you could use the ASSIGN 1 and 2
knobs to control effect depth for two different
effects, while using the Foot Controller to control
modulation. These control assignments are called
"Controller Assign." You can have independent
Controller Assign settings for each performance.
Set the Control Change number for the Breath Controller.
The function set here can be controlled by the Breath Controller
connected to the BREATH CONTROLLER (page 28) jacks on the
rear panel.
Determines the Control
Determines the Control Change numbers
Change numbers for the
for Foot Controllers 1 and 2. To control
ASSIGN 1 and 2 knobs
these functions, connect Foot Controllers
on the front panel.
to the FOOT CONTROLLER jacks on the
rear panel (page 28).
❏ Settings
(See chart below)
Control Change Numbers
LCD
00 off
01 ModWheel
02 Breath
04 FootCtrl
05 PortTime
06 Data Ent
07 MainVol
10 Panpot
11 Express
16 General 1
17 General 2
18 General 3
19 General 4
LCD
32 off
64 Sustain
65 PortaSw
66 Sostenut
67 Soft
72 Release
74 Bright
75 Decay
84 PortaCtl
91 Effect 1
92 Effect 2
93 Effect 3
● [F6]-[SF1] Common Effect Connection
This display gives you comprehensive control over
the effects.
• EF PART (Effect part) ➡ VCE INS (Voice
Insertion)
Determines the part to which the Insertion effect is
applied. The Insertion connection type (page 40) depends
on the voice of the selected part.
❏ Settings
Part 1 ~ 4, Plug-in Part 1 ~ 3, off
• EF PART (Effect part) ➡ PLG-EF (Plug-in
Efect)
Determines the part to which the Insertion effect is
applied. This parameter is available only when a special
Effect Plug-in board (VH) has been installed.
❏ Settings
Part 1~4, Plug-in Part 1~3, A/D, off
• Variation Type
Determines the Variation effect type.
❏ Settings
Refer to the Effect Types list in the separate
Data List booklet.
• Variation Return
Determines the Return level of the Variation Effect.
❏ Settings
0 ~ 127
• Variation Pan
Determines the pan position of the Variation effect sound.
❏ Settings
L64 (far left) ~cnt (center) ~ R63 (far
right)
• Variation To Reverb
Determines the Send level of the signal sent from the
Variation Effect to the Reverb Effect.
❏ Settings
0 ~ 127
• Variation To Chorus
Determines the Send level of the signal sent from the
Variation Effect to the Chorus Effect.
❏ Settings
0 ~ 127
• Chorus Type
Determines the Chorus effect type.
❏ Settings
Refer to the Effect Types list in the separate
Data List booklet.
• Chorus Return Level)
Determines the Return level of the Chorus Effect.
❏ Settings
0 ~ 127
• Chorus Pan
Determines the pan position of the Chorus effect sound.
❏ Settings
L64 (far left) ~ cnt (center) ~ R63 (far right)
Performance Edit mode
Basic Structure (page 40)
169
MOTIF Reference