Midi 3 Display - Yamaha Clavinova CVP-600 Owner's Manual

MIDI
MIDI 3 Display —
From the MIDI 3 display you can set whether or not MIDI data re-
ceived from an external device is affected by the Transpose setting (page
130) or not, whether or not the Auto Accompaniment, rhythm and Har-
mony data is transmitted, and whether or not the MIDI data received
from an external device affects the keyboard-played voices.
MIDI Transpose Receive
When MIDI TRANSPOSE is set to on, the Transpose setting (page
130) will affect the MIDI data received by the Clavinova.
Transmitting Auto Accompaniment /Harmony Data
When the ACMP&RHY parameter is set to on, accompaniment data
is transmitted via the MIDI [OUT] terminal when playing back the Auto
Accompaniment. The data is transmitted over MIDI channels 9 - 16.
If the HARMONY parameter is set to on, Harmony data is transmitted
via the MIDI [OUT] terminal when using the Harmony function. The
data is transmitted over MIDI channels 6 - 8.
The Auto Accompaniment or Harmony can be recorded to a computer
or external sequencer by using these functions.
Remote Keyboard
MIDI data received over the channel set in the REMOTE KBD pa-
rameter will affect your keyboard performance. The received data also
can be recorded. Select OFF to prevent external MIDI data from affect-
ing your keyboard performance. The following four data types can be
received.
• Key ON/OFF
• Control Change (performance expression data; only those listed below)
#1 Modulation
#7 Volume
#11 Expression
#64 Sustain Pedal
#65 Sostenuto Pedal
• Program Change (voice change data)
• Pitch Bend
146
CVP-98/96/600
11
PAGE
..............................................................................
..............................................................................................
#66 Soft Pedal
#123 All notes off
BANK Select MSB
BANK Select LSB
Transpose Receive
• Settings: ON (enabled), OFF (disa-
bled)
• Basic setting: ON
• Backup of last settings: OFF
• The Transpose setting made in the
KEYBOARD 1 Page 1 in the Function
section is effective for data transmitted
via MIDI.
Auto Accompaniment/ Harmony
Transmission
• Setting of ACMP & RHY : OFF (not
transmitted), 9 - 16 ch (transmitted)
• Basic setting: OFF (not transmitted)
• Backup of last settings: OFF
• Setting of HARMONY : OFF (not
trasmit), 6 - 8 ch (transmit)
• Basic setting: OFF (not transmit)
• Backup of last settings: OFF
.....
• When transmitting the Auto Accompa-
niment or Harmony data via MIDI, do
not select the Auto Accompaniment/
Harmony MIDI channels 6 - 8 or 9 - 16
for transmitting the data of your key-
board performance. Doing so may
result in your keyboard performance
data being mixed with the Auto Accom-
paniment or Harmony data.
• If either the ACMP & RHY or HAR-
MONY is turned on, the Auto Accom-
paniment or Harmony playback data is
transmitted via MIDI, even if the RIGHT
1 transmission channel (page 143) is
turned off.
Remote Keyboard
• Settings: OFF (not received), 1 - 16
(received over the specified channel)
• Basic setting: OFF
• Backup of last settings: OFF
• MIDI data received by the remote
keyboard function cannot be output via
the MIDI [OUT] terminal.