Setting The Effect Depth; Restoring The Basic Settings - Yamaha Clavinova CVP-600 Owner's Manual

Voice Effects

Setting the Effect Depth

The Effect Depth parameter lets you adjust the degree or depth of the
currently selected effect type. To set this, press R1 DPT or MIC DPT
(to highlight the corresponding parameter), and use the data dial or [–/+]
buttons.
Depending on the currently selected voice, the R1 DPT indication
may automatically change to the R2 DPT, or L DPT.
Use MIC DPT to set the Effect Depth applied to the microphone input
connected to the [MIC.] jack.
The following parameters can be selected by first selecting the corre-
sponding voice from the main display of the Dual or Split modes.
R1 DPT
R2 DPT
L DPT
Pressing R1 DPT or MIC DPT also advances the value. To reset the
value to the basic setting, simultaneously press the [–/+] buttons.

Restoring the Basic Settings

You can easily restore the basic settings of the selected voice's EF-
FECT TYPE and R1 DPT parameters by pressing RESET in the display.
46
CVP-98/96/600
First voice of Dual mode or right voice of Split mode
Second voice of Dual mode
Left voice of Split mode
Effect Depth
• Range: 0 (no effect) — 100 (maxi-
mum)
• Basic setting: Differs depending on
the voice. (microphone = 0)
• Backup of last settings: OFF
• If the Effect Depth is set to 0, the [EF-
FECT] lamp will not light.