Yamaha Clavinova CVP-600 Owner's Manual page 116

Song Recording
X
Pause before the Punch-in point.
Press the [PAUSE] button to pause play back a bit before the point at
which you want to start recording. Leave a measure or more before the
Punch-in point so you'll be able to grasp the timing for the Punch in.
C
Turn on the Punch-in/out function.
Press the [REC] button.
The PUNCH IN/OUT display appears.
V
Select a track.
Press the TRACK < or > buttons or use the data dial or [–/+] buttons
to select the track.
The selected track is indicated by an underline mark.
Use the LCD button at the far right to set the selected track to
RECORD (record enable) or OFF (record/playback disable). PLAY can
only be selected for tracks which contain data. When a track is muted,
the track number is "ghosted" (shown in lighter indication) in the dis-
play.
114
CVP-98/96/600
SONG CONTROL
PLAY/
PAUSE REW FF STOP
SONG CONTROL
PLAY/
STOP
PAUSE REW FF
.......................................................................................................
...................................................
REC
...............................................
REC
• Only tracks which allow Punch-in/out
Recording will appear and can be
selected. The rhythm, Auto Accompa-
niment and Harmony tracks cannot be
selected.
Auto Setting of Punch-in/out
• If no other track is selected, the last
recorded track is automatically se-
lected for Punch-in/out.