Initial Edit (Changing The Initial Data) - Yamaha Clavinova CVP-600 Owner's Manual

Song Recording
Z
Specify the track to be quantized.
Use the TRACK
use the data dial or [–/+] buttons to select the track to be quantized.
X
Specify the quantize "size."
Press the LCD button below the note symbol to select the desired
quantize "size" as shown below.
C
Execute the Quantize operation.
Press the QUANTIZE button. At the "Are you sure?" confirmation
prompt, press the YES button to execute the Quantize operation or NO
button to cancel.
The QUANTIZE display will be changed to the UNDO display after
the Quantize operation is executed. If the result is not what you ex-
pected, press the UNDO button to restore the data of the quantized track
to what it was before performing the Quantize operation.
To exit the Track Quantize function, press the [REC] button (the
lamp goes out).
You can also press the [EXIT] button to exit the Track Quantize func-
tion.

Initial Edit (Changing the Initial Data)

The Initial Edit function allows you to change the volume level of
each track or the initial data set for the entire song after you've finished
recording. The INITIAL EDIT display appears when you press the
INITIAL EDIT button in the RECORD [EDIT] display. All sixteen
tracks are displayed simultaneously in this display and the settings such
as volume, voices and reverb depth can be changed.
124
CVP-98/96/600
or button to highlight the Track parameter, then
..................................................................
32nd notes
3
16th note triplets
16th notes
3
8th note triplets
8th notes
3
quarter-note triplets
quarter notes
.................................................
.....................................................
• Only tracks containing data will appear
and can be selected.
• Only the note data and voice data are
quantized.
• A bar graph indicating the progress of
the Quantize operation will appear
while the data is being processed.
• You can check if the results are as you
expected or not, by starting and stop-
ping playback with the [PLAY/STOP]
button before performing the UNDO
operation.
• The Undo function cannot be used if
you've changed the quantize "size,"
selected another track, or exited from
this mode.
• The Undo feature cannot be used for
data recorded to internal RAM (see
page 127).
• Any voice changes entered in the
middle of the original song will be
erased when the voice parameter is
changed in the Initial Edit mode.
• Depending on the data type, some
parameters cannot be changed. For
such parameters, a "Fixed" indication
is shown.
• For songs recorded to 1/RIGHT or 2/
LEFT of the copied DOC files, voice
changes can only be made to track 1
or 2.