Song Name - Yamaha Clavinova CVP-600 Owner's Manual

Song Name

This function is used to name song files recorded with the Clavinova
or to change existing names. To call up the Song Name function, press
the SONG NAME button in the RECORD [EDIT] display.
Z
Enter the desired name.
Use the CHAR > button to move the underline cursor to the desired
character position in the file name display. (File names can be up to 12
characters in length).
Use the data dial or [–/+] buttons to select and highlight the char-
acter or mark you wish to enter.
Press the CHAR SET button to enter the selected character to the cur-
rent cursor position and move to the next position. Continue entering
other characters or marks in this way.
To delete the character at the previous position, press the BACK
SPACE button. The character before the underline cursor is deleted and
the cursor moves back to the deleted position.
To abort the Song Name operation and return to the RECORD EDIT
display, press the CANCEL button.
X
Register the name.
When the song file name is complete, press the OK button to register
it. The new name is registered as the current song file name. To cancel
the operation, press the CANCEL button.
To exit from the Song Name function, press the [REC] button (the lamp
goes out).
............................................................................
..........................................................................................
Song Recording
• The Song Name function cannot be
used when a disk has not been in-
serted in the disk drive.
CVP-98/96/600
121