Registration (Registration) Display - Yamaha Clavinova CVP-600 Owner's Manual

Registration (REGISTRATION) Display —
This function allows you to save the panel settings registered using
the Registration function to disk, load Registration data from disk, delete
Registration data from a disk, or name Registration files.
Before executing the Registration function, make sure that the disk you
want to use for this operation is inserted in the disk drive.
Refer to page 35 in the Reference Manual for a list of settings regis-
tered by the Registration function.
Z
Select the file type.
Press either of the two left-most LCD buttons to select the file type to
be loaded, saved, deleted or named.
REGISTRATION Contains each or all Registration file(s) in 20 Registration
memory locations.
ALL SETUP An All Setup file contains all panel setting data in the list
on page 35 in the Reference Manual.
To save or load the data of REGISTRATION, first set the REGIST
(Registration number) parameter. When saving, press the REGIST but-
ton to select the desired Registration file number from ALL or A-1 —
E-4 to save to disk. When loading, select the internal destination loca-
tion from ALL or A-1 — E-4.
X
Select the file operation.
Use the second LCD button from the right to select the desired file
operation: LOAD, SAVE, DELETE or NAME.
C
Press the START button.
Operation begins.
The subsequent steps for each file operation depend on the operation
you've selected. Refer to the corresponding instructions for each opera-
tion below.
.........................................................................................
...........................................................................
............................................................................
7
PAGE
CVP-98/96/600
Disk
139