Midi; Midi 1 Display - Yamaha Clavinova CVP-92 Owner's Manual

MIDI

MIDI 1 Display —
Functions related to MIDI (Musical Instrument Digital Interface) can
be called up from pages 9 through 11.
I Set the Send Channel SEND CH
In any MIDI control setup, the MIDI channels of the transmitting and
receiving equipment must be matched for proper data transfer (channels
1 through 16). This function sets the MIDI transmit channels of the
CVP-94/92 .
Independent MIDI channels can be set for the following three differ-
ent types of play data.
LEFT
RIGHT1
RIGHT2
G MIDI Reception
The CVP-94/92 always receives MIDI data in the "Multi Timbre" mode. This is a mode in which the
CVP-94/92 voices can be independently controlled on different MIDI channel numbers (1 through 16) by
an external MIDI device. This means that you can produce the sound of a full band or ensemble on the
CVP-94/92 by using a computer or MIDI sequencer.
I Local Control ON/OFF LOCAL
"Local Control" refers to the fact that, normally, the CVP-94/92 key-
board controls its internal tone generator, allowing the internal voices to
be played directly from the keyboard. This situation is called "Local
Control ON". When the local control is set to off, the "keyboard" and
"sound source" are separated and no sound is output through the CVP-
94/92 when playing the keyboard. However, the data of the keyboard
performance is output through MIDI. By setting Local Control to off,
you can play an external MIDI tone generator from the keyboard of the
CVP-94/92 without sounding the internal voices.
To set this, press the LOCAL button. The data dial and [–/+] buttons
cannot be used.
128
PAGE
Left voice in the Split mode
Right voice in the Split mode/1st voice in the Dual mode/voice
for normal keyboard performance
2nd voice in the Dual mode
9
..........................................................
.............................................................
• If you are using the MIDI terminals, set
the HOST SELECT switch to "MIDI".
Transmission Channel
• LEFT setting: OFF (no transmission),
channels 1 — 16
• Basic setting: 3
• Backup of last settings: OFF
• RIGHT 1 setting: OFF (no transmis-
sion), channels 1 — 16
• Basic setting: 1
• Backup of last settings: OFF
• RIGHT 2 setting: OFF (no transmis-
sion), channels 1 — 16
• Basic setting: 2
• Backup of last settings: OFF
Local Control
• Settings: ON/OFF
• Basic setting: ON
• Backup of last settings: OFF