Yamaha Clavinova CVP-600 Owner's Manual page 54

Starting/Stopping the Accompaniment Style
There are two introduction patterns: Intro A and Intro B.
If you press [INTRO] after pressing [MAIN B], the style starts with
the Intro B pattern, followed by Main B.
ACMP ON
Start with Fade In
This function lets you gradually fade in the volume of the Style with
any of the start methods above.
Press the [FADE IN/OUT] button (the lamp lights) and fade in start
is set to stand-by.
Press the [FADE IN/OUT] button again to turn the lamp off and can-
cel the fade in start.
ACMP ON
To start the style, press the [START/STOP] button, or press the
[SYNCHRO] button and play a note or chord on the keyboard.
The lamp flashes during the fade in, and the lamp turns off when
the fade in is completed.
[FADE IN/OUT] can be set to on no matter which pattern
([INTRO], [MAIN A], [MAIN B], [ENDING]) is selected.
Starting styles with the Left Pedal
You can also use the left pedal to start the style by setting the the Left
Pedal function (page 133) to Start/Stop. The pedal can also be set to
control Break, Fade-in/out, Fill-in, or Ending. This setting is exception-
ally convenient, since it lets you control the style with your foot while
leaving both hands free to play.
[BEAT]
.............................................................................................................................
During style playback, the left-most beat lamp (red) flashes on the
first beat of each measure, and the other lamps (green) flash for each
successive beat. The current tempo and measure number are shown at
the left side of the LCD display.
52
CVP-98/96/600
AUTO ACCOMPANIMENT
AUTO FILL
VIRTUAL
ARRANGER INTRO MAIN A
...............................................................................................
AUTO ACCOMPANIMENT
AUTO FILL
VIRTUAL
ARRANGER INTRO MAIN A MAIN B
FADE
MAIN B ENDING IN/OUT
FADE
ENDING IN/OUT
..................................................
• If you press the [MAIN A] button before
pressing [INTRO] and then press
[MAIN B], playback starts with Intro A
and continues automatically with the
Main B pattern. (The reverse is also
true: i.e., selecting Intro B with [MAIN
B] before pressing [INTRO], then
pressing [MAIN A] to continue with
Main A.)