[Exit] Button; [Display Hold] Button; Adjusting The Contrast Of The Lcd Display - Yamaha Clavinova CVP-600 Owner's Manual

[EXIT] Button

Press [EXIT] in order to leave the current mode or return to the pre-
vious display.

[DISPLAY HOLD] Button

The [DISPLAY HOLD] button lets you keep the display from chang-
ing. For example, voices and accompaniment styles can be selected by
pressing the VOICE button or STYLE button. The display of the se-
lected voice/style appears for a few seconds, then changes to the previ-
ous display. Displays such as this that appear briefly are called pop-up
displays. The [DISPLAY HOLD] lamp flashes to indicate that it is the
pop-up display, and that the previous display will appear after a few sec-
onds. By pressing the [DISPLAY HOLD] at this point, the lamp stays
lit continuously and the selected display stays. Pressing [DISPLAY
HOLD] again turns the lamp off and the display returns to the previous
one.

Adjusting the Contrast of the LCD Display

Turn the [CONTRAST] button in order to adjust the contrast or
brightness of the display.
EXIT DISPLAY HOLD
CONTRAST
• If [DISPLAY HOLD] is pressed for any
non pop-up display, and the lamp is lit
up, the pop-up display cannot be
opened.
• The duration of pop-up displays can be
set with the Pop-up Time parameter
(page 153).
EXIT DISPLAY HOLD
Basic Operation
15
CVP-98/96/600