Keyboard; Keyboard 1 (Keyboard 1) Display - Yamaha Clavinova CVP-600 Owner's Manual

Keyboard

Keyboard 1 (KEYBOARD 1) Display —
Tune
...........................................................................................................................
The Tune function lets you make fine adjustments to the pitch,
allowing you to accurately match the tuning with that of other instru-
ments. The frequency (in Hz) of A3 is displayed in the TUNE sec-
tion. It can be set in approximately 0.2-Hz steps over a range of +/–
approximately 26 Hz (+/– approximately 100 cents).
Transpose
The Transpose function makes it possible to shift the pitch of the
keyboard in semitone units, allowing you to match the pitch of the
keyboard to the range of other instruments or singers, or letting you
easily play in a different key without having to change your finger-
ing. For example, if the Transpose amount is set to "+5" semitones,
playing C results in a pitch of F, or in other words, you can play in
the key of C major on the keyboard and automatically have the pitch
transposed to F major.
130
CVP-98/96/600
............................................................................................................
1
PAGE
Tune
• Range: 414.8 Hz (–102.1 cent) — 466.6Hz
(+101.62 cents)
Initial value : 440 Hz
Backup of last settings: OFF
Restoring the Basic Setting
• To restore the basic setting, simultaneously
press both the TUNE
the [–/+] buttons.
Hz (Hertz)
• Pitch is measured in units of Hertz (abbrevi-
ated Hz), which represents the number of
times the sound wave vibrates in a second.
Cent
• Cent is a unit of pitch, equal to 1/100 of a
semitone. (100 cents = 1 semitone)
• Tune has no effect on the Drum Kit voices.
• The XG Master Tune setting is effective
when playing back songs containing XG
Master Tune data. The corresponding
value is indicated in the Keyboard 1 display
(Function display page 1).
Transpose
• Range: – 24 semitone (–2 octaves) — + 24
semitone (+ 2 octaves)
• Initial Value: 0
• Backup of last settings: OFF
Restoring the Basic Setting
• To restore the basic setting, simultaneously
press both the TRANSPOSE
both the [–/+] buttons.
Soundable Range of Transpose
• Notes below and above the original 88-key
range (A-1 to C7) sound one or two
octave(s) higher and lower, respectively.
• The Transpose function does not affect the
Drum Kit voices.
• When playing back songs containing XG
Transpose data, the XG Transpose data is
effective only for the data playback sound.
The value set on the panel affects the
keyboard sound.
• The value set here affects the play data
transmitted via MIDI.
buttons or both
buttons or