Custom Style
Custom Style Alert & Error Displays
The following alert and error displays may appear in the corresponding situations.
Insufficient Memory To Store
This alert message will appear if there is not enough memory to per-
form a store operation.
In this case it will be necessary to either delete a style you don't need
or simplify the style you are currently recording. Press CANCEL to re-
turn to CUSTOM STYLE display page 1, at which point you can sim-
plify the current style (by clearing a part, etc.), or DELETE to go to the
"Delete style ?" display:
Use the MEMORY No.
style you want to delete, then press OK to delete the style, or CANCEL
to abort.
Memory Full During Recording
This alert message will appear if the memory becomes full during
recording or editing.
78
CVP-98/96/600
..............................................................
and
buttons to select the number of the
..........................................................
• The amount of memory being used for
the selected style is also shown on the
display (in approximate kilobytes) so
as to set up the approximate standard
which style to delete in relation to the
total 300 KB memory space.