Changing The Song/Folder Name - Yamaha Electone STAGEA ELB-01 Owner's Manual

NOTE
A blank song cannot be
named. Once a song
contains data, it can be
named.
6
122 ELB-01 Owner's Manual
5

Changing the Song/Folder Name

Even though the Electone automatically assigns a generic name to each recorded song,
it's best to give each song a "meaningful" name, such as an original title or even a date
indicating when it was recorded.
1
Insert the media into the USB TO DEVICE terminal.
2
Select the song/folder whose name you want to change.
For details on selecting a song or a folder, see steps 2 and 3 on page 112.
3
Use the PAGE buttons to select the Rename display (Page 4).
The Rename display appears.
<RENAME>
« 001:SONG 1
4
Move the cursor to the desired point by using the [C] [D] buttons.
Pressing the [D] button moves the cursor one step to the right, while pressing
the [C] button moves it to the left
<RENAME>
« 001:SONG 1
5
Change the character at the cursor position.
Replace the current character at the cursor by using the DATA CONTROL dial.
Turn it clockwise to select the characters in order, and counter-clockwise for
reverse order.
<RENAME>
« 001:SONH 1
[EXE] ›
_
Cursor
[EXE] ›
_
Cursor
[EXE] ›
»
_
»
»