Changing Settings In The Mixer Display - Yamaha Clavinova CVP-105 Owner's Manual

Changing Settings in the MIXER Display

Z Select the track to be changed.
Select the desired track by pressing TRACK < or >. Selecting TTL
(Total) will change the overall settings of the song rather than the set-
tings of individual tracks.
Press the rightmost LCD button to select PLAY (playback), OFF, or
SOLO for the selected track. Select SOLO if you want to play only the
selected track.
X Select the parameter to be edited.
Press SELECT
or
Current value for
the selected track
Parameter selected
for editing
Selected track is
highlighted.
C Edit the value or setting.
Use the data dial or [–] and [+] buttons to change the value or setting.
You can make changes to the parameters while the song is playing back,
letting you immediately hear the results of your edits.
.........................................................
CVP-109/107/700
..................................................
to select the desired parameter.
CVP-109/107/700
............................................................................
Song Playback
Depending on the file type, voice
changes may only be possible for tracks
1 and 2.
• Selecting TTL and changing the
REVERB DEPTH value will also affect
the sound of your keyboard perform-
ance.
• The voices of tracks to which Auto
Accompaniment, rhythm, and harmony
data have been recorded can also be
changed.
• Volume range: 0 — 127
• If another song is selected, all settings
will return to the basic settings for the
song (or the settings used to record
the song).
• If the Auto Accompaniment is turned
on during playback of an original song
that was recorded on the CVP-109/
107/105/700/103, the MIXER display
will function as Auto Accompaniment
Part Volume Control (page 77) instead
of Song Track Volume Control.
CVP-109/107/105/700
121