Changing The Reverb Type; Setting The Total Depth - Yamaha Clavinova CVP-105 Owner's Manual

Changing the Reverb Type

You can change the reverb type using the REVERB display (page 47).
Use the REVERB TYPE
or select the REVERB TYPE function and use the data dial or the [–] and
[+] buttons. (You can also use the left and right LCD buttons to select
one of the reverb types listed in the display.)
The selected reverb type is highlighted.
Because the basic setting of the reverb type depends on the accompa-
niment style, the reverb type may change automatically when you select
a different style.

Setting the Total Depth

The overall depth of the selected reverb effect(s) can be set using the
TOTAL DEPTH function in the REVERB display (page 47).
Z Select the TOTAL DEPTH function.
The TOTAL DEPTH function is highlighted.
X Set the total depth of the reverb effect(s).
You can change the setting using the TOTAL DEPTH
tons, the data dial, or the [–] and [+] buttons.
To reset the value to the basic setting of 64, simultaneously press
either the TOTAL DEPTH
.....................................................................
and buttons to change the reverb type,
CVP-107/700
................................................................................
and buttons or the [–] and [+] buttons.
Reverb Type
• Settings: See table on page 218.
• Basic setting: Depends on style.
• The reverb type selection affects all
voices played by the keyboard or Auto
Accompaniment. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
reverb type is selected.
• The reverb effect cannot be applied to
the sounds input through the AUX IN
[R] and [L/L+R] jacks.
• It is also possible to apply reverb ef-
fects to the keyboard voices using the
[EFFECT] button. See the Effect Type
List on page 219 for details.
• If both the [REVERB] button and the
[CHORUS] and/or [EFFECT] buttons
are turned on, all effects will be ap-
plied.
On the CVP-109, the TOTAL DEPTH
setting determines the depth of both the
Natural Reverb and normal reverb ef-
fects.
TOTAL DEPTH
• Range: 0 (no effect) — 127 (max.)
• Basic setting: 64
• The TOTAL DEPTH setting globally
and but-
affects all voices. Different settings
cannot be made for each voice.
• You can also set the reverb depth
separately for the rhythm and accom-
paniment parts, and for each keyboard
part. (See the next operation.)
Reverb
49
CVP-109/107/105/700