Yamaha Clavinova CVP-105 Owner's Manual page 139

X Pause before the punch-in point.
Press the [PAUSE] button to pause play back a bit before the point
at which you want to start recording. Leave a measure or more before
the punch-in point so you'll be able to grasp the timing before you
punch in.
PAUSE
C Turn on the Punch-in/out function.
Press the [REC] button.
PAUSE
The PUNCH IN/OUT display appears.
V Select a track.
....................................................................................................
Press the TRACK < or > buttons or use the data dial or [–] and [+]
buttons to select the track.
The selected track is indicated by an underline mark.
Use the rightmost LCD button to set the selected track to RECORD
(recording enabled) or OFF (recording/playback disabled). PLAY can
only be selected for tracks which contain data. When a track is muted,
the track number is "ghosted" (shown in lighter indication) in the dis-
play.
................................................
SONG CONTROL
PLAY/
REW FF STOP REC
............................................
SONG CONTROL
PLAY/
REW FF STOP REC
Song Recording
Auto Setting of Punch-in/out
If no other track is selected, the last re-
corded track is automatically selected for
Punch-in/out.
If you select a track that was used to record
an Auto Accompaniment or rhythm part, or
a track (6, 7, or 8) that contains a harmony
part (see sidebar on page 133), you will not
be able to set the track to RECORD.
CVP-109/107/105/700
139