Changing The Chorus Settings - Yamaha Clavinova CVP-105 Owner's Manual

Chorus

Changing the Chorus Settings

Displaying the Chorus Settings
Press [DIRECT ACCESS], then [CHORUS] to display the CHO-
RUS display page.
EXIT DIRECT ACCESS
The LCD displays the CHORUS page.
Changing the Chorus Type
You can change the chorus type selection in the CHORUS page. Se-
lect the chorus type using the left and right LCD buttons.
You can also change the chorus type using the CHORUS TYPE
buttons, or by selecting the CHORUS TYPE function and using
and
the data dial or the [–] and [+] buttons.
The selected chorus type is highlighted.
Because the basic setting of the chorus type depends on the accompa-
niment style, the chorus type may change automatically when you select
a different style.
52
CVP-109/107/105/700
.....................................................
DUAL SPLIT REVERB CHORUS
CVP-107/700
....................................................................
CVP-107/700
EFFECT
If you press the [ < ] button or the [ > ]
button while the CHORUS page is show-
ing, the REVERB DEPTH page or the
EFFECT 1 page (the EFFECT page on
the CVP-105) will be displayed. Refer to
the other sections of this chapter for
details on reverb and other effect set-
tings.
Chorus Type
• Settings: See table on page 219.
• Basic setting: Depends on style.
• The chorus type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
chorus type is selected.
• It is also possible to apply chorus
effects to the keyboard voices using
the [EFFECT] button. See the Effect
Type List on page 219 for details.
• If both the [CHORUS] button and the
[REVERB] and/or [EFFECT] buttons
are turned on, all effects will be ap-
plied.