Overall Song Playback Volume Control - Yamaha Clavinova CVP-105 Owner's Manual

Selecting Voices for 1/RIGHT and 2/LEFT Parts
The playback voices for the 1/RIGHT and 2/LEFT parts can be se-
lected in the SONG PLAY [L&R VOICE] display.
Press L&R VOICE
the display, then select the playback voice for 1/RIGHT and 2/LEFT
parts by using the data dial or [–] and [+] buttons.
You can also select a voice by using the L&R VOICE

Overall Song Playback Volume Control

The [ACMP/SONG VOLUME] slider can be used to control the
overall volume of song playback.
When you enter the Song Play mode, the song volume level is auto-
matically set to the volume level that was last set in the Song Play mode,
regardless of the slider's position. After that, moving the slider will set
the volume to the corresponding level.
or to highlight the corresponding function in
VOLUME
MASTER ACMP/SONG
VOLUME VOLUME
MAX MAX
MIN MIN
................
The playback voice can only be changed
when playback is stopped at the top of
the song.
or .
If the Auto Accompaniment is turned on
during playback of an original song that
was recorded on the CVP-109/107/105/
700/103, the [ACMP/SONG VOLUME]
control will affect the level of the Auto
Accompaniment rather than that of song
playback.
Song Playback
119
CVP-109/107/105/700