Setup Memory - Yamaha Clavinova CVP-105 Owner's Manual

Other Record Edit Functions
B Exit the Initial Edit function.
To do this, press the [REC] button.
The [REC] lamp goes out and the Initial Edit operation is com-
pleted.
You can also exit the Initial Edit function by pressing the [EXIT]
button.
If you do this after making any edits that you have not yet written to
disk, a "Write edited data?" message will be displayed. Press YES to
write the edited data and exit from the Initial Edit mode, NO to exit with-
out writing the data, or CANCEL to return to the Initial Edit mode and
continue editing.

Setup Memory

The Setup Memory function lets you save the current panel settings to
disk so that they will automatically be restored whenever you play back
the song being edited.
Z Set up the Clavinova to play the song.
Change the Clavinova's functions to the settings you want it to use
when playing back the song you're editing.
X Select the Setup Memory function.
Use the PAGE [>] button to select the RECORD EDIT 2 display
(page 4 of the Song Record mode display) if necessary, then press the
SETUP MEMORY button.
The "Save panel settings to disk?" message is displayed.
Press YES to save the current panel setup, or CANCEL to return to
the RECORD EDIT 2 display.
The Clavinova displays the "Don't remove the disk!" mes-
sage and bar graph as it saves the data to the disk, then displays
a "Completed!" message before it returns to the RECORD EDIT
2 page.
172
CVP-109/107/105/700
..................................................................
......................................
................................................
• For details regarding which settings
are saved by the Setup Memory func-
tion, see the Parameter Chart on page
13 of the Reference Booklet.
• The settings saved by the Setup
Memory function will be deleted if you
re-record the song data or use Initial
Edit function (page 171) to edit the
initial parameter settings.