Yamaha Clavinova CVP-105 Owner's Manual page 168

Other Record Edit Functions
Z Specify the two tracks to be mixed.
Press the TRACK A and TRACK B buttons to highlight the correspond-
ing functions, and use the data dial or [–] and [+] buttons to select the
numbers of the two tracks to be mixed. The voices which are used for the
selected tracks are indicated above these functions in the LCD display.
X Specify the destination track.
Use the TRACK C function to specify the track to which you want to
record the mixed data. You can also specify the track for the mixed data
by pressing the TRACK C button to highlight the corresponding func-
tion, then using the data dial or [–] and [+] buttons.
Any previous data in the destination track will be erased.
C Execute the Track Mix operation.
Press the MIX button to begin execution of the Track Mix operation.
An "Are you sure?" message is displayed. Press YES to execute the
Track Mix operation or press NO to cancel.
When the operation is completed, the MIX function will be replaced
by the UNDO function, allowing you to undo the Track Mix operation
and restore the previous data.
Press the [REC] button (the lamp goes out) to exit the Track Mix
function.
You can also exit the Track Mix function by pressing the [EXIT]
button.
Track Delete (TRACK EDIT page 2)
The Track Delete function can be used to delete the data from any
specified track.
Z Specify the track to be deleted.
Press the TRACK
the data dial or [–] and [+] buttons to select the track to be deleted.
168
CVP-109/107/105/700
..............................................
..............................................................
....................................................
.........................................................
or button to highlight the function, then use
• The original data will remain in tracks
A and B after the Track Mix function is
executed. If the old data is not needed,
you should delete it. (See "Track De-
lete," below.)
• A bar graph indicating the progress of
the Track Mix operation will appear
while the data is being processed.
• You can check whether the results are
what you expected by starting and
stopping playback with the [PLAY/
STOP] button. (You should try this
before you do something that would
make it impossible to select the UNDO
function.)
• The Undo function cannot be used
once you've selected another track or
exited from this mode.
• The Undo feature cannot be used for
data recorded to internal memory (see
page 174).
Only tracks containing data can be se-
lected.