Individual Part Volume Control; Changing Settings In The Track Mixer Display - Yamaha Clavinova CVP-92 Owner's Manual

Song Playback

Changing Settings in the TRACK MIXER Display

Z
Select the track to be changed.
Select the desired track by pressing TRACK < or >. Selecting TO-
TAL will change the overall settings of the song rather than the settings
of individual tracks.
Press the far right LCD button to select PLAY (playback), OFF, or
SOLO for the selected track. Select SOLO if you want to play only the
selected track.
X
Select the parameter to be edited.
Press SELECT M or L to select the desired parameter.
Selected pa-
rameter to be
edited
C
Edit the value or setting.
Use the data dial or [–/+] buttons to change the value or setting. You
can make changes to the parameters while the song is playing back, let-
ting you immediately hear the results of your edits.
84
........................................................
.................................................
Current value of the selected track
Selected track is highlighted.
..........................................................................
• Depending on the file type, voice
changes may only be possible for
tracks 1 and 2.
• Selecting TOTAL and changing the
REVERB DEPTH value will also affect
the sound of your keyboard perform-
ance.
• The voices of tracks to which data of
Auto Accompaniment, rhythm and/or
harmony have been recorded can also
be changed.
• Volume range: 0 — 100
• One EFFECT TYPE can be set to a
single song.
If another song is selected, all settings
will return to the basic settings for the
song (or the settings used for record-
ing the song).
• If Auto Accompaniment is turned on
during playback of an original song
that was recorded without the Auto
Accompaniment function, the MIXER
display will function as Auto Accompa-
niment Part Volume Control instead of
Song Track Volume Control.