Other Functions; Added Gpi Functions; Added Functions That Can Be Assigned To The User Defined Keys; Added Functions That Can Be Assigned To The User Defined Knobs - Yamaha CL5 Supplementary Manual

Other functions

Added GPI functions

New functions have been added that can be set for GPI OUT.
Function PARAMETER 1
DANTE REDUNDANCY IND. PRIMARY
SECONDARY
Added functions that can be assigned to the USER
DEFINED keys
New functions have been added that can be assigned to the USER DEFINED keys.
Function PARAMETER 1
CUE CUE MODE
DCA ROLL-OUT LAST DCA SEL
DCA1
:
DCA16
FADER BANK
SNAPSHOT
NUENDO LIVE ADD MARKER
SCENE INC
DEC
RECALL
STORE
PARAMETER 2 Description
This function activates when the primary
connection is working properly on the
Dante audio network with a star
connection (redundancy network).
This function activates when the
secondary connection is working
properly on the Dante audio network with
a star connection (redundancy network).
PARAMETER 2 Description
This function switches the cue mode.
This function rolls out or retracts the
selected DCA group.
This function takes a snapshot of the
bank settings for all blocks (A, B, and C).
(Hold down the key for two seconds or
longer.)
Alternatively, this function displays the
last snapshot of the bank settings.
(Hold down the key, then release it within
two seconds.)
This function executes ADD MARKER of
NUENDO Live.
This function selects the next existing
scene number.
This function selects the previous
existing scene number.
This function recalls the currently-
selected scene.
This function stores the current settings.
Function PARAMETER 1
SENDS ON FADER MIX1-24
MTRX1-8
MIX ON FADER
MATRIX ON FADER NORMAL/WITH
SENDS ON FADER NORMAL/WITH
Added functions that can be assigned to the USER
DEFINED knobs
New functions have been added that can be assigned to the USER DEFINED knobs.
Function PARAMETER 1
DIRECT OUT LEVEL
LEVEL
OUTPUT LEVEL LEVEL
SCENE SELECT
RECORDER INPUT GAIN
OUTPUT GAIN
Description of PARAMETER 1 for function SET BY SEL has been changed to match the description
for the QL series.
The name of function SEND ENCODER MODE has been changed to SEND MODE.
Added functions that can be assigned to the
assignable encoders
New functions have been added that can be assigned to the assignable encoders (GAIN/PAN/ASSIGN
knobs).
Function
NO ASSIGN (Nothing will be displayed.)
DIGITAL GAIN D.GAIN
EQ ATT ATT
INPUT DELAY DELAY
Units of scale are m, ms, and ft. No description for samples.
DIRECT OUT LEVEL D.OUT
11
PARAMETER 2 Description
NORMAL/WITH This function switches between the
CUE normal function on/off (NORMAL), and
the function with cue on/off (WITH CUE).
NORMAL/WITH
With the WITH CUE option, cue will be
CUE
enabled if SENDS ON FADER mode is
NORMAL/WITH
engaged or if you switch mode during
CUE
SENDS ON FADER mode.
Also, with the WITH CUE option, cue for
CUE
all output channels will be canceled if
SENDS ON FADER mode is
CUE disengaged.
PARAMETER 2
SELECTED CH, CL5: CH1–CH72, CL3: CH1–CH64,
CL1: CH1–CH48
MIX1–MIX24, MTRX1–MTRX8, ST L, ST R, MONO (C)
Channel name display indication
V2.0 Supplementary Manual
Other functions