TDA1200・TDA1600
Operating Machine and Mower Units
11.
Remove the bolt and spring washer from
the tine holder and then remove the spring
box.
Note:
It makes it easier to remove the right front
roller bracket.
Removal of front roller bracket_008
1
2
3
12.
Loosen the roller stopper and hold the front
roller bracket by hand.
Removal of front roller bracket_009
1
2
3
Page 4-24
1
2
3
kqszfp-006
Spring box
Bolt and spring washer
Tine holder
1
2
3
kqszfp-007
Roller stopper
Fastening plate
Front roller bracket
13.
Remove the roller stopper and fastening
plate together while holding the front roller
bracket.
1
Removal of front roller bracket_010
1
Installation of front roller bracket
Caution
Refer to "Tightening torques" (Page 3-4) .
Note that the Baroness product warranty may
not apply to any defects caused by incorrect
or overtorque tightening, etc.
For installation, reverse the removing
procedure.
Inspection and repair of each section
Lower housing Assy
Lower housing Assy layout
1
Lower housing Assy layout_001
1
Inspection and repair of each section
kqszfp-008
Front roller bracket
1
g3cyaf-001
Lower housing Assy