Greasing; About Greasing; Greasing Points - Baroness TDA1200 Service Manual

TDA1200・TDA1600
Maintenance standards and maintenance

Greasing

About Greasing

Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.

Greasing points

Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
2
4
3
Greasing points_001
Page 3-8
2
1
6 4
6
5
8bq62b-213
1 Rear roller
2 Front roller
3 Clutch
4 Journal cross
5 Safety cover
6 Slide (inner/outer tubes)
1. Rear roller
One location in each of the left and right side
of the rear roller.
Greasing points_002
2. Front roller
One location in each of the left and right side
of the front roller.
Greasing points_003
No. of
Location

Greasing

Points
2
2
1
2
2
1
8bq62b-214
8bq62b-215
Greasing