Replacing The Datatrak Fuse - Graco EcoQuip2 EQm Operation, Repair, And Parts

Replacing the the DataTrak DataTrak Fuse
Replacing Replacing the DataTrak
FIRE AND FIRE FIRE AND EXPLOSION AND EXPLOSION EXPLOSION HAZARD
To reduce the risk of fire and explosion, the fuse
must be replaced in a non-hazardous location.
Use only an approved replacement fuse (see
table). Use of an unapproved fuse will void Graco's
warranty.
Replace Replace Fuse Replace Fuse Fuse
1. Remove the screw, metal strap, and plastic
holder.
2. Pull the fuse away from the board
3. Replace with an approved fuse.
3A3489A
Fuse
Fuse
HAZARD HAZARD
Approved Fuses
Approved Approved
DataTrak Part DataTrak DataTrak Part Part *Series Letter *Series *Series
Number Number Number
17K057 A or B
C and later
All other part
numbers
B and later
Repair
Fuses
Fuses
Letter Fuse Letter Fuse Required Fuse Required Required
24C580
24V216
A 24C580
24V216
31