Cleaning The Water Tank; Using The Water Dose Meter - Graco EcoQuip2 EQm Operation, Repair, And Parts

Cleaning the the Water Water Tank
Cleaning Cleaning the Water
1. Perform Pressure Relief Procedure, page
2. Disconnect the water inlet hose.
3. Open the inlet ball valve (N) and drain.
4. Remove the tank drain.
3A3489A
Tank
Tank
10.
5. Remove the tank lid and clean out with pressure
washer.
Using the Using Using the Water the Water Dose Water
The water dose meter is a feature used on EcoQuip2
Elite models only. This feature allows the user to
adjust how wet the blast will be during operation.
1. Follow steps 1 — 11 on
Setting Up the Equipment, page
2. Adjust the water dose valve (S) to adjust how wet
the blast will be during operation.
Operation
Dose Meter Dose Meter Meter
13.
23