Warnings - Graco EcoQuip2 EQm Operation, Repair, And Parts

Warnings

Warnings
Warnings Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
SPECIAL SPECIAL SPECIAL CONDITIONS
• Ground all equipment in the work area. See Grounding
• All label and marking material must be cleaned with a damp cloth (or equivalent).
DUST AND AND DEBRIS
DUST DUST AND
Use of this equipment can result in the release of potentially harmful dust or toxic substances
from the abrasive being used, the coatings being removed, and the base object being blasted.
• For use only by sophisticated users familiar with applicable governmental safety and industrial
hygiene regulations.
• Use equipment only in a well-ventilated area.
• Wear a properly fit-tested and government approved respirator suitable for the dust conditions.
• Follow local ordinances and/or regulations for disposal of toxic substances and debris.
4
WARNING WARNING WARNING
CONDITIONS FOR CONDITIONS FOR SAFE FOR SAFE USE SAFE
DEBRIS HAZARD HAZARD
DEBRIS HAZARD
USE (ATEX USE (ATEX systems (ATEX systems only) systems only) only)
Grounding Instructions Instructions.
Grounding Instructions
3A3489A