Pick Roller Cleaning Method - Xerox PHASER 8500 Service Manual

Pick Roller Cleaning Method

Phaser 8400/8500/8550/8560 Color Printer Service Manual
Ink Smears, Oil Spots, or Random Ink Streaks
Problem type
Ink smears on the front,
back, or edges of a page.
Oil (Drum fluid) on top
edge of print.
Media Jams:
Note
Refer to the jam codes in "Jam Codes" on page 3-48.
Problem type
Tray 1 (MPT) jams.
Front Door jams.
Exit jams.
Tray 2 ~ 4 jams.
Duplex path jam
Double picks
Tray 1
Tray 1 pick roller can be cleaned with an alcohol moistened swab.
1. Open the Front Door.
2. Rotate the roller and clean it with an alcohol-moistened swab.
3. Rotate the roller so that the flat side is facing down.
4. Close the Front Door.
Solution
Select the automated procedure
from the Control Panel.
Smears
Check the maintenance kit for ink and paper-dust build-up
on the wiper blade.
Select the automated procedure
from the Control Panel.
Smears
Solution
Clean the Pick Roller. Follow the "Pick Roller Cleaning
Method" on page 7-3.
Clean the transport rollers.
Clean the Exit Rollers and Stripper Blade.
Clean the appropriate tray feed roller.
Clean the Preheater, Duplex, and Exit Rollers.
Clean the Pick Rollers and Separator Pad with alcohol.
Clean pick pad with clear packaging tape using the
procedure "Pick Roller Cleaning Method" on page 7-3.
Cleaning and Maintenance
Remove Print
Remove Print
7-3