Adjusting The Fuser; Adjusting The Altitude; Performing A Developer And Transfer Roller Cleaning Procedure - Xerox VersaLink C600 User Manual

3. To select the paper type for the adjustment, touch Paper Type, then touch the paper
type.
4. To adjust the transfer voltage, for Voltage Level, touch the Plus icon (+) or the Minus
icon (-).
5. Touch Adjust.
6. To exit the menu, touch X.
7. To return to the Home screen, press the Home button.

Adjusting the Fuser

Use Adjust Fuser for optimum print quality across a wide range of paper types. If the
toner on a print is smearing or can be rubbed off the paper, increase the temperature
for the paper you are using. If the toner is blistered or mottled, decrease the temperature
for the paper you are using.
To adjust the fuser:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Fuser Temperature Adjustment.
3. To select the paper type, touch Paper Type, then touch the name of the paper type
in the list.
4. To increase or decrease the fusing temperature, touch the arrow buttons, then touch
Adjust.
5. To adjust the fuser for another paper type, select it from the list, then repeat steps
3 and 4.
6. To exit the menu, touch X.
7. To return to the Home screen, press the Home button.

Adjusting the Altitude

Use Adjust Altitude to adjust the altitude to match that of the location where the printer
is installed. If the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Altitude Adjustment.
3. Touch the altitude of the location of the printer, then touch OK.
4. To return to the Home screen, press the Home button.

Performing a Developer and Transfer Roller Cleaning Procedure

When a printer sits idle for an extended time, visible background toner can potentially
appear on prints. Use the Developer and Transfer Roller Cleaning procedure to reduce
background toner on prints.
To perform a Developer and Transfer Roller Cleaning procedure:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Developer & Transfer Roller Cleaning.
3. To perform a Developer and Transfer Roller Cleaning, touch Start.
4. At the successfully completed prompt, touch Close.
® ®
Xerox VersaLink C600 Color Printer
User Guide
Maintenance
7-11