Xerox PHASER 8500 Service Manual page 288

Xerox printer user manual

Hide thumbs Also See for PHASER 8500:

Table of Contents

Service Parts Disassembly

Position the Wiper so both ends are all the way down following

reassembly (see "Wiper Alignment Procedure" on page 6-2).

When reinstalling the belt into the wiper clip in 8500/8550/8560 models,

place the belt partly on the clip, and then press the center of the clip with

a small needle-nose plier until the belt is secured in the clip.

Later versions of 8500/8550 models serial numbered WYN1xxxxx or

WYP1xxxxx use the wider style Wiper Belt and 8400 model Wiper Blade.

Phaser 8400/8500/8550/8560 Color Printer Service Manual

Troubleshooting