Technical Specifications; Ordering Codes - Omega CN8200 Series User Manual

1/16 din temperature & process controllers
Table of Contents

Advertisement

Technical
Specifications
Input Type
Thermocouple
RTD
Linear
Output Device
R
DC
T
F
FH
B, C, E, J, K, N, NIC, NNM, R, S, T, Platinel II
Maximum lead resistance 100 ohms
for rated accuracy
Platinum 2- and 3-wire, 100 ohms at
0° C, DIN curve standard (0.00385)
1000 ohms available
0-50 mV/10-50 mV, 0-5 V/1-5 V
0-20 mA/4-20 mA, 0-100 mV, 0-10 V
5 A (120/240 Vac) relay, normally
open, used for switching resistive loads.
If an "R" output is selected, order
CNQUENCHARC. If relays or solenoids
are to be driven, select the "T" output.
20 Vdc pulsed output for solid-state relays.
1 A @ 120/240 Vac , solid-state relay, zero
voltage-switched and optically isolated from
drive signal. Only resistive loads to 1A may
be controlled directly. Larger loads may be
controlled using an external contactor.
4-20 mA, full output to load with 500 ohm
impedance max.
High impedance 4-20 mA (1000 ohms max.)
CN8200

Ordering Codes

36
37
Ordering Number
CN8201
CN8202
Output Type - Ordering Suffix
First Output
Relay
-R1
dc Pulse
-DC1
1A SSR
-T1
4-20 mA (500 ohm max.)
-F1
4-20 mA (1000 ohm max.)
-FH1
Optional Power Supply
24 Vac/Vdc
-LV
Additional Options (cannot be field-installed)
Description
Single alarm relay
Dual alarms, ac SSR
Dual alarms, DC 24V
RS-232 communications
RS-485 communications
RS-485 w/Digital input, switch closed
RS-485 w/Digital input, switch open
RS-485 w/Digital input, 5V
RS-485 communications, MODBUS
RS-485 MODBUS w/Digital input, switch closed
RS-485 MODBUS w/Digital input, switch open
RS-485 MODBUS w/Digital input, 5V
Process output, 4 to 20 mA
Process output, 0 to 5 Vdc
Digital input, switch closed w/1 alarm
Digital input, switch open w/1 alarm
Digital input, 5V w/1 alarm
Transducer power supply, 15 Vdc
Transducer power supply, 12 Vdc
Transducer power supply, 10 Vdc
Transducer power supply, 5 Vdc
Description
1/16 DIN Single output
1/16 DIN Dual output
Second Output
-R2
-DC2
-T2
-F2
-FH2
Ordering Suffix
-AL1
-AL2
-AL3
-C2
-C4
-C4-DIC
-C4-DIO
-C4-DIV
-C4-MOD
-C4-MOD-DIC
-C4-MOD-DIO
-C4-MOD-DIV
-PVSV1
-PVSV2
-RSP1
-RSP2
-RSP3
-XP1
-XP2
-XP3
-XP4

Advertisement

Table of Contents
loading

Table of Contents