Table of Contents
Advertisement
INST.No.INE-418-1P1CE
10. Specifications
Sensor
Measuring range
Accuracy ratings
Relative
humidity
Stability (under EMC test environment)
Temperature coefficient
Response time
Sensor
Measuring range
Temperature
Accuracy ratings
Stability (under EMC test environment)
Sensor interchangeability
Power supply
Current data
Data reading
Display
Parameter item
Display content
Number of stored data
Communications function
High-polymer capacitance type
0 to 100%RH
±2%RH (0 to 90%RH，at 25ºC), ±3%RH (90 to 95%RH, at 25ºC)
±3%RH
±0.1%RH/ºC (5 to 80ºC)
Shorter than 15 seconds (90% response, 25ºC constant, under 0.1m/s ventilation)
Semi-conductor type temperature sensor
-10 to 50ºC, -40 to 80ºC (Probe type RH32P, separated type RH32S)
±0.5ºC (0 to 50ºC), ±1ºC (other than the left shown)
±0.5%RH
Plug-in type interchangeability (Plug-in type interchangeability including 1.5m cable for probe type and separated type sensor)
2 AA (UM-3) alkaline batteries or 100VAC (AC power adapter – sold separately)
Year, month, day, hour, minute, temperature measured value (ºC or ºF),
Relative humidity or dew-point temperature measured value (ºC or ºF)
Programmed parameters, stored data with year, month, day, hour, and minute (The year data is available in using the data
logging software package (sold separately).
Max. temp./humidity, min. temp./humidity, average temp./humidity, totalized temperature
Clock: Year, month, day, hour, minute, Temperature: ºC, ºF
Relative humidity, dew-point temperature (ºC or ºF)
Storage mode: Manual [by pressing of ENT (LOG) key for more than2 seconds] or automatic
Storage start time: Year, month, day, hour, minute ,or by pressing of ENT (LOG) key while pressing ∧ (SHIFT) key
Storage stop time: Year, month, day, hour, minute or by pressing of ENT (LOG) key while pressing ∧ (SHIFT) key
Storage repetition: Disable, every day, every week
Measurement interval: continuous, 1 to 60 minutes
High/low alarms, totalizing reference temperature, totalizing direction, auto-power-off, key lock
Clock – displayed constantly
Measured values – displayed by pressing DISP key for about 2 seconds in power-off condition
Temperature/humidity – each maximum 8000 data, total 16000 data EEPROM）
RS-232C or RS-485
-26-
Advertisement
Table of Contents
