Table of Contents
Advertisement
Starting Your Spray and
Adjusting Pressure
Always refer to the disinfectant manufacturer's
recommendations for an acceptable spray of
disinfectant.
1.
Point Spray Gun towards the surface to
be sprayed.
2.
Confirm the Pressure Control Knob is at
the lowest setting.
3.
Disengage Trigger Lock.
4.
Pull and hold Spray Gun trigger.
5.
Slowly increase pressure using the
Pressure Control Knob. Set to the
minimum setting necessary to produce
an acceptable spray of disinfect. This will
help reduce overspray.
6.
Adjust the Spray Gun's distance from the
surface and your hand speed to achieve
the desired surface coverage. Typically,
the Spray Gun will be approximately 8 to
12 inches away from the surface being
sprayed.
Clear Tip Clog
To avoid injury, never point gun at your
hand or into a rag!
In the event debris clogs the Spray Tip, the
Spray Gun is designed with a reversible Spray
Tip that quickly and easily clears the particles
without disassembling the Spray Gun.
3A7653A
How to Spray
1.
Release Trigger. Engage Trigger Lock.
Rotate Spray Tip to UNCLOG position.
Disengage Trigger Lock. Trigger Spray
Gun in waste bucket to clear clog.
UNCLOG
2.
Engage Trigger Lock. Rotate Spray Tip
back to SPRAY position. Disengage
Trigger Lock and continue spraying.
SPRAY
17
Advertisement
Table of Contents
