Table of Contents
Advertisement
Start Up
4.
Put Drain Tube in a pail and turn
Prime/Spray Valve horizontal to PRIME
position to relieve pressure.
5.
Hold a metal part of the Spray Gun firmly to
a grounded metal pail. Point Spray Gun
into pail. Disengage the Trigger Lock and
trigger the Spray Gun to relieve pressure.
6.
Engage the Trigger Lock.
12
7.
If you suspect the Spray Tip or hose is
clogged or that pressure has not been
fully relieved:
a.
VERY SLOWLY loosen the Spray
Tip Guard retaining nut or the
Airless Hose end coupling to
relieve pressure gradually.
b.
Loosen the nut or coupling
completely.
c.
Clear Airless Hose or Spray Tip
obstruction.
Trigger Lock
Always engage the Trigger Lock when
sprayer is stopped to prevent the Spray from
being triggered accidentally by hand or if
dropped or bumped.
3A7653A
Advertisement
Table of Contents
