Table of Contents
Advertisement
Setup
Setup
When unpacking sprayer for the first time or
after long term storage, perform Setup
procedure.
1.
Connect 1/4" Graco Airless Hose to Fluid
Outlet Fitting (remove red storage plug
from fitting if present). Use wrenches to
tighten securely.
2.
Assemble optional 1/8" Airless Whip
Hose to end of 1/4" Airless Hose. Use
wrenches to tighten securely.
10
3.
Insert other end of Airless Whip Hose
through Hose Guard at base of Spray
Gun. Connect to Spray Gun. Use
wrenches to tighten securely.
4.
Remove Spray Tip Guard assembly
from Spray Gun.
3A7653A
Advertisement
Table of Contents
