Start Up; Pressure Relief Procedure - Graco SaniSpray HP 65 Operation - Repair - Parts

Start Up

Pressure Relief Procedure

Follow the Pressure Relief
Procedure whenever you see this
symbol.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection or splashing
fluid, follow the Pressure Relief
Procedure whenever sprayer is stopped
and before sprayer is cleaned or checked,
and before equipment is serviced.
1. Turn ON/OFF Switch to the OFF
position.
3A7653A
2. Engage the Trigger Lock. Always
engage the Trigger Lock when sprayer is
stopped to prevent the Spray Gun from
being triggered accidentally.
3. Turn Pressure Control Knob to the
lowest setting.
Start Up
11