Graco SaniSpray HP 65 Operation - Repair - Parts page 7

Portable hopper sprayer
Hide thumbs Also See for SaniSpray HP 65:
Table of Contents

Advertisement

GROUNDING
This product must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with an appropriate grounding plug. The plug
must be plugged into an outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
Improper installation of the grounding plug is able to result in a risk of electric shock.
When repair or replacement of the cord or plug is required, do not connect the grounding
wire to either flat blade terminal.
The wire with insulation having an outer surface that is green with or without yellow stripes
is the grounding wire.
Check with a qualified electrician or serviceman when the grounding instructions are not
completely understood, or when in doubt as to whether the product is properly grounded.
Do not modify the plug provided; if it does not fit the outlet, have the proper outlet installed
by a qualified electrician.
This product is for use on a nominal 120V circuit and has a grounding plug similar to the
plug illustrated below.
Only connect the product to an outlet having the same configuration as the plug.
Do not use an adapter with this product.
Extension Cords:
Use only a 3-wire extension cord that has a grounding plug and a grounding receptacle that
accepts the plug on the product.
An undersized cord results in a drop in line voltage and loss of power and
overheating.When in doubt use the next heavier gauge. The smaller the gauge number the
heavier the cord.
When using the sprayer outdoors, use an extension cord suitable for outdoor use.
Make sure your extension cord is not damaged. When using an extension cord, be sure
to use a cord heavy enough to carry the current that your sprayer draws. See chart for
appropriate sizes and lengths:
AWG (American Wire Gauge)
3A7653A
Conductor Size
16
12
WARNING
Length
Maximum
25 ft.
50 ft.
Warnings
ti3509b
7

Advertisement

Table of Contents
loading

Table of Contents