Spray Tip And Pressure Selection - Graco MAGNUM TRUEAIRLESS Project Painter Plus Owner's Manual

Spraying

Spray Tip and Pressure Selection

Spray Tips come in a variety of sizes for spraying a wide range of materials. Your sprayer
includes a 515 Spray Tip for use with most paints on large surfaces such as walls and ceilings.
If you are spraying stain or need a different spray fan width, refer to the Spray Tip chart below
to select the best Spray Tip for your project. Additional Spray Tip sizes are available where paint
sprayers are sold.
1. What material are you spraying?
•
The thicker the material, the larger
Spray Tip size you will need.
2. What spray fan width is needed for your
project?
•
Narrow spray fan for smaller
projects
•
Wider spray fan for larger projects
3. Confirm your sprayer can be used with
your Spray Tip size.
Material
Stain and Sealer
Semi Transparent Stain
Solid Stain
Interior Paint/Primer
Exterior Paint/Primer
•
As you spray, the Spray Tip wears and as a result, the hole size gets larger. Starting with
a Spray Tip hole size smaller than the maximum will allow you to spray longer within the
compatibility of the sprayer.
•
Spray Tips wear with use and need periodic replacement.
20
Fan Width
4 in Fan 6 in Fan 8 in Fan
Width Width Width
209 309
211 311 411
211 311 411
313 413
211 311 411
313 413
315 415
417
415
417
Tip Number Calculation:
•
The first digit is half of the fan width
(#5 x 2 = 10 inch fan width).
•
The last two digits are the size of the
tip opening in thousandths of an
inch.
10 in Fan 12 in Fan
Width Width
Each Sprayer Supports a Maximum Spray Tip Size
Project Painter Plus, X5/LTS15, X7/LTS17
Project Painter Plus, X5/LTS15, X7/LTS17
Project Painter Plus, X5/LTS15, X7/LTS17
Project Painter Plus, X5/LTS15, X7/LTS17
Project Painter Plus, X5/LTS15, X7/LTS17
Project Painter Plus, X5/LTS15, X7/LTS17
Project Painter Plus, X5/LTS15, X7/LTS17
517
515
Project Painter Plus, X5/LTS15, X7/LTS17
517
Sprayer Compatibility
X7/LTS17
X7/LTS17
3A6430C EN