SonicWALL SuperMassive 9200 Getting Started Manual page 37

Scenario A: NAT Mode Gateway
For new network installations or installations where the
SuperMassive appliance is replacing the existing network
gateway.
In this scenario, the SuperMassive appliance is configured in
NAT mode to operate as a single network gateway. Multiple
Internet connections may be routed through the SonicWall
appliance for load balancing and failover purposes. Because
only a single SonicWall appliance is deployed, the added
benefits of high availability with a stateful synchronized pair
are not available.
To set up this scenario, follow the steps covered in:
• Configuring NAT Mode Gateway on page 40
A
SonicWall SuperMassive
SDHC
M0
ALARM
TEST
SonicWALL SuperMassive 9600
PWR 1 PWR 2
CONSOLE
DMZ Zone WLAN Zone
SonicWall SuperMassive 9200/9400/9600 Getting Started Guide
10GE 1GE 1GE
X18 X16 X14 X12 X10 X8 X6 X4 X2 X0
BYPASS
STATUS
MGMT X19 X17 X15 X13 X11 X9 X7 X5 X3 X1 ISP 1
Internet
LAN Zone
37