Using The Setup Wizard - SonicWALL SuperMassive 9200 Getting Started Manual

Using the Setup Wizard
When you are ready to begin initial setup, configure your
management computer with a static IP address on the
192.168.1.0/24 subnet, such as 192.168.1.20. This allows your
computer to connect to SonicOS via the MGMT interface.
NOTE: Be sure to disable pop‐up blocking software, or
set your web browser to allow pop‐ups and cookies.
To configure initial settings using the Setup Wizard:
1 With your computer connected to the appliance MGMT
port, start your web browser and navigate to the
default MGMT interface IP address:
http://192.168.1.254
The initial screen displays the options to launch the
Setup Wizard or configure the appliance manually.
2 Launch the SonicOS Setup Wizard by clicking the first
here link. This wizard helps you quickly configure the
SonicWall appliance to secure your Internet
connection.
3 Follow the on‐screen prompts to configure the admin
password and network settings.
If a DHCP server is available on the network, the wizard
requests IP settings from it. You can click Next to accept
these or click Manual Config to enter a static IP address
and other network settings.
In the Manual Configuration screen, click Retry to
revert to DHCP, or enter your own settings and then
click Next.
SonicWall SuperMassive 9200/9400/9600 Getting Started Guide 19