SonicWALL SuperMassive 9200 Getting Started Manual page 11

SuperMassive Front Panel
Console Port
Access the SonicOS Command Line Interface
(CLI) using the serial CLI cable
Control Buttons
Navigates the LCD screen; for
future use
LCD Screen
Display screen
SonicWall SuperMassive 9600
USB Ports (2)
For 3G/4G/Analog modem adaptor support
SafeMode Button
Press and hold until Test LED starts blinking to set the
appliance into SafeMode.
LED Indicators
Power: Blue: Indicates power supplies are operating correctly
Yellow: Indicates a disconnected power supply
Test: Quick Blinking Yellow: Initializing
Slow Blinking Yellow: SafeMode
Solid Yellow: Test mode
Alarm: Indicates alarm activity in Red LED
M0: Indicates Expansion Module 0 activity in Red LED
SDHC Port
Secure Digital High-Capacity (SDHC) port for
future use
MGMT Port (1 GE)
1 Gigabit Ethernet Management Interface
10GE
X18 X16
SDHC
M0
ALARM
TEST
PWR 1 PWR 2
MGMT X19 X17
CONSOLE
X16-X19 (10 GE SFP+)
10 Gigabit Ethernet hot-pluggable ports
*X16, X18, and X19 are designated with a 'dot' to signify ports
with a direct uplink to the appliance CPU for maximum
throughput; X17 shares the CPU uplink with X0-X15.
SonicWall SuperMassive 9200/9400/9600 Getting Started Guide
Bypass Status
Turns on when fail-to-wire
bypass mode is active
1GE 1GE
X14 X12 X10 X8 X6 X4 X2 X0
X15 X13 X11 X9 X7 X5 X3 X1
X0-X7 (1 GE)
High-speed copper Gigabit
Ethernet ports
X8-X15 (1 GE SFP)
1 Gigabit Ethernet hot-pluggable SFP
interfaces for high-speed fiber or copper
Ethernet communication
BYPASS
STATUS
11